
04 · Flat roofs
Flat roofs that drain.
Standing water is what kills a flat roof. We build in the slope, then lay a system made for Florida sun.
What it is
Flat is never quite flat.
A flat roof needs a quarter inch of fall per foot to move water to the drains. Old roofs lost theirs as the deck sagged. Tapered insulation puts it back.
On top goes a modified bitumen system: a base sheet and a cap sheet, torch-applied or self-adhered.
Signs you need it
- Puddles that are still there two days after rain
- Blisters or soft spots underfoot
- Cracks at the parapet walls
- Leaks at the scuppers or drains
- Patches on top of patches
Drag the slope
Watch the water move.
Drag from a dead-flat roof to a quarter inch per foot and watch where the rain goes.
How the job runs
Dry from the deck up.
You get photos at every stage, and one person to text.
Core sample + price
We cut a small core to count the old layers and check for wet insulation.
Permit
Filed with the approved roof system.
Tear-off
Old layers off to the deck; wet insulation never stays.
Tapered insulation
Cut to your roof so every part drains.
Base + cap sheet
Seams lapped and sealed, parapets wrapped, scuppers rebuilt.
Final inspection
Final paper and a water test at the drains.
Questions about flat roofs
Can you just coat it?
A coating can buy a few years on a dry roof. On wet insulation it traps the water, so we test first.
Torch or self-adhered?
Both work. Self-adhered is quieter and has no open flame, useful near neighbours.
How long will it last?
It depends on drainage and foot traffic. We give you the maker's warranty terms in writing.
Related
Other roofs we do.
Next step
Puddles on the roof? Let's fix the slope.
We look at the roof, take photos, and send the price in writing.


